Shop
Close
#01140.0-00 – STEGO – Thermostat
Thermostat, KTO 011 Series, 0°C to +60°C, Normally Closed, 10 A at 250 Vac, DIN Rail
Close
#HG 140 – STEGO – heater 14005.0-00
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature must be maintained above a minimum value. The aluminum profile heater body design has a chimney effect to distribute heat evenly. The cage clamp connectors save time and simplify installation.
Close
#KT0 011 – STEGO – SMALL COMPACT THERMOSTAT
The mechanical thermostats KTO 011 is two state regulators used to control heaters, coolers, filter fans or signal devices.
Thermostat (normally closed); contact breaker for regulating heaters. The contact opens when temperature is rising.
Close
#MFR 012 – STEGO – MECHANICAL HYGROSTAT Humidity Control
The electromechanical hygrostat is designed to control enclosure heaters so that the dew point is raised when a critical relative humidity of 65% is exceeded. In this way condensation and corrosion in enclosures with electric/electronic components is effectively prevented.
Close
01230.0-00
The electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. Due to its wide voltage range the hygrotherm can be utilised anywhere in the world. The LED integrated in the adjustment knob on the active controller is lit when the connected device is in operation.
Close
STEGO – ELECTRONIC HYGROTHERM #ETF 012
The electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. Due to its wide voltage range the hygrotherm can be utilized anywhere in the world. The LED integrated in the adjustment knob on the active controller is lit when the connected device is in operation.
